 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| POWERLINE - DC/DC-Converter EW-Series, 15W, 1.6 kV Isolation, 4:1 Wide Input Range (Single & Dual Output) Features 15 Watts Output Power 4:1 Wide Input Voltage Range International Safety Standard Approvals Six-Sided Continuous Shield Selection Guide 24V and 48V Input Types Part Number Input Voltage VDC RP15-2405SEW RP15-2412SEW RP15-2415SEW RP15-2405DEW RP15-2412DEW RP15-2415DEW RP15-4805SEW RP15-4812SEW RP15-4815SEW RP15-4805DEW RP15-4812DEW RP15-4815DEW 9-36 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 18-75 High Efficiency up to 82% Standard 50.8 x 40.6 x 10.2 Package Fixed Switching Frequency UL 1950 Component Recognised Output Voltage VDC 5 12 15 5 12 15 5 12 15 5 12 15 Output Current mA 3000 1250 1000 1500 625 500 3000 1250 1000 1500 625 500 Input Current (see note 6) mA 822 801 801 822 801 801 411 401 401 411 401 401 Efficiency (see note 7) % 80 82 82 80 82 82 80 82 82 80 82 82 Capacitive Load max. F 6800 890 570 1700 300 200 6800 890 570 1700 300 200 RP15-4805SEW: Derating & Efficiency Curves RP15-4805SEW Derating Curve 125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 Output Power (%) Natural Convection RP15-4805SEW Derating Curve with Heat Sink (see note 3) 125 100 75 RP15-4805SEW Efficiency vs Input Voltage 83 82 81 80 79 78 77 76 75 70 65 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 Efficiency (%) 50 Natural Convection 20 25 30 35 40 45 50 55 60 65 70 75 Input Voltage (V) Ambient Temperature Range (C) Ambient Temperature Range (C) RP15-4805SEW Efficiency vs Output 83 82 81 80 79 78 77 76 75 70 65 50 External Output Trimming 7 (7) Trim Up 8 Trim Down 6 (5) 0.5 1 1.5 2 2.5 3 Pin 6, 7,8 - Single Output Pin 5, 7,8 - Dual Output Efficiency (%) Output Load (A) www.recom-international.com August 2002 PO 45 POWERLINE - DC/DC-Converter EW-Series, 15W, 1.6 kV Isolation, 4:1 Wide Input Range (Single & Dual Output) Specifications (typical at nominal input and 25C unless otherwise noted) Output Power Voltage Accuracy (full Load and nominal Vin) Voltage Adjustability Minimum Load (see note 1) Line Regulation (LL-HL at full load) Load Regulation (10% to 100% FL) Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith) Temperature Coefficient Transient Response (25% load step change) Over Voltage Protection (with zener diode clamp) 5V 12V 15V output output output Single Dual Dual Single 15W max. 2% 10% 10% of FL 0.5% 1% 5% 5% 75mVp-p 0.02%/C, max. 500sec 6.2V 15V 18V 150% max. Hiccup, automatic recovery RP15 24V nominal input RP15 48V nominal input 9-36VDC 18-75VDC Pi Type 24V input 48V input 50VDC 100VDC 20mAp-p 20ms typ. DC-DC ON DC-DC OFF Nominal input Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V 20mA see Selection Guide" table 1600VDC min. 109 min. 300pF max. 270kHz typ. UL 1950, EN60950 Nickel-coated copper Non-conducted black plastic Epoxy (UL94-V0) 48g 50.8 x 40.6 x 10.2 mm 2.041 x 106 Hours -40C to +85C (with derating) +100C -55C to +105C continued on next page Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Input Voltage Range Input Filter Input Surge Voltage (100 ms max.) Input Reflected Ripple (nominal Vin and full load, see note 2) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 3) Remote off input current Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency Approved to Safety Standards Case Material Base Material Potting Material Weight Dimensions MTBF (see note 4) Operating Temperature Range (see derating curves on previous page) Maximum Case Temperature Storage Temperature Range PO 46 August 2002 www.recom-international.com POWERLINE - DC/DC-Converter EW-Series, 15W, 1.6 kV Isolation, 4:1 Wide Input Range (Single & Dual Output) Specifications continued (typical at nominal input and 25C unless otherwise noted) Thermal Impedance (see note 5) Thermal Shock Vibration Relative Humidity Conducted Emissions Radiated Emissions Conducted Immunity Radiated Immunity Surge Fast Transient ESD Notes 1. The RP15 E series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. Simulated source impedance of 12uH. 12uH inductor in series with +Vin. 3. The ON/OFF control is referenced to negative input. 4. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40 C. (Ground fixed and controlled environment). 5. Heat sink is optional. Thermal impedance is 8.24C/Watt for natural convection and the P/N is 7G-0011A. 6. Maximum value at nominal input voltage and full load. 7. Typical value at nominal input voltage and full load. Natural convection 10C/Watt MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH EN55022 EN55022 EN61000-4-6 EN61000-4-3 EN61000-4-5 EN61000-4-4 EN61000-4-2 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Package Style and Pinning (mm) 40.60 15.20 5.10 4 2 1 17.80 10.20 Pin Connections dia. 1.0 Pin # 1 2 4 5 6 7 8 Single +Vin -Vin CTRL No Pin +Vout -Vout Trim Dual +Vin -Vin CTRL +Vout Common -Vout Trim 50.10 Bottom View 45.70 8 7 6 5 10.20 17.80 10.20 12.70 5.6 Pin Pitch Tolerance 0.35 mm www.recom-international.com August 2002 PO 47 |
Price & Availability of RP15-4815SEW
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |